CAD-CAM Problem
CAD-CAM Problem
Assignment Due: 2pm, 23th March 2018 (GMT)
Design/Optimise/Print
Shown on the following sheet is the design brief for a customisable coat hook. Working to the provided design constraints you are to design, simulate and optimise your design to meet the following design requirements:
• Your design must be within the spatial restrictions shown in Figure 1.
• Your design must accept a typical clothes hanger, with a maximum wire thickness of 4mm and nominal hook radius of 20mm.
• Your design must be mounted by a single #6 self-tapping countersunk screw.
• Your design must support a load of 1kg, hung from the hook.
• Assuming a simulation material of Nylon 101, your final design must be within a Factor of Safety of 2 in all areas.
• Your design should be suitable for 3D printing on an Ultimaker 2 Extended+ 3D printer.